Machined needle roller bearing-NEY（DuangDong）Bearing Industry Co.,LTD

& nbsp; features single or double row needle roller bearing with flange consists of machined outer ring, needle roller and cage components with flange and separable inner ring. needle roller bearing with flange is X-life bearing. these bearings have optimized raceway surfaces. Therefore, it has higher bearing capacity and longer rated life. needle roller bearings without inner ring have extremely compact radial dimensions. However, they require that the raceway of the shaft be hardened and ground. '> 40mm . if the shaft cannot be used as the raceway of rolling bearing, the bearing with inner ring shall be used. this kind of bearing has a single row design, but also a double row design na69 , its d & Ge; 32mm . the standard inner ring is allowed to have displacement in the axial direction not exceeding the value listed in the dimension table. When large displacement occurs, the standard ferrule can be replaced by wide inner ring IR . inner circle: see page 776 . And. On both sides are contact seals. bearings are lubricated with composite lithium grease ga08 . arcanol load150 suitable for relubrication. For this purpose, the outer ring has a lubricating groove and a lubricating hole. 'EN-US ' > d & le; The 7mm series of NKI have no lubrication holes and grooves. in order to prevent the influence of the outside world, the combination of seal ring series ( G , GR and SD ) and wide inner ring IR can be used for bearing sealing. The sealing ring and inner ring should match the needle bearing. The outer surface of the inner ring can be used as the sliding surface of the sealing lip. sealing ring: see page 804 and tpi128 , single lip and double lip sealing rings. the operating temperature range of open bearing is & ndash; 20 ℃ to + 120 ℃. limited by grease and sealing materials, the operating temperature range of needle bearing with seal is & ndash; 20 ℃ to + 100 ℃. there are two kinds of cages: steel cage and nylon cage. The suffix of the bearing with nylon cage is TV . before using nylon cage bearing, check the compatibility of lubricant and cage material (PA66 GF / h) . see the following table for suffixes of existing designs.

Number：
ID：
OD：
Width：

Machined needle roller bearing

Without Inner ring

Without Inner ring Open

With Inner ring Open

Without Inner ring, seal

With Inner ring , Seal

Non-flange, without Inner ring Open

Non-flange,Inner ring ,Open

Self-aligning, With or without Inner ring

Needle roler /Thrust ball bearing , without Inner ring

Needle roller/ Thrust ball bearing , Without Inner ring, with or without cover

Needle roller/ Cylindrical roller thrust bearing, without Inner ring, with or without cover

Needle roller/ Angular contact ball bearing,Inner ring

Inner ring ,without ubrication hole

Inner ring, with ubrication hole